Default is disabled (User adjustable: 0–9999Ah).
This section provides a detailed overview of the module's operation.
Default is 5.1A (User adjustable: 0A–5.1A). Zk-5kx Manual
Turns off the converter if the input voltage drops below a set threshold. OVP/OCP: Over-voltage and over-current protection. OPP: Over-power protection (typically capped at 82W).
By default, the module may boot up with the output turned off ( OFF ). If you want the module to automatically output power as soon as it receives input power, while on the main screen. The screen will toggle between showing "Open On" (Starts ON) and "Open Off" (Starts OFF). 5. Step-by-Step Battery Charging Guide Default is disabled (User adjustable: 0–9999Ah)
Over-temperature protection; the cooling fan automatically starts when the temperature exceeds 50°C or current exceeds 1A. Practical Tips
0 NewMasterCode # NewMasterCode # Example: 0 888888 # 888888 # → Beeps confirm. Turns off the converter if the input voltage
Configure the output voltage to match the combined forward voltage drop of your high-power LED array. Set the current limit exactly to the rated operating current of the LEDs to prevent thermal runaway.
To save your changes and exit the menu, . Setting Default Power-On State
Yes (Prevents high current spikes during startup, though high-power loads may occasionally trigger protection if not managed). Operating Frequency: 180 kHz 2. Hardware Layout and Interface Breakdown