Configuring a VOCOM 1 involves a series of straightforward actions, most of which are performed within the Premium Tech Tool software itself or through a dedicated configuration utility. The steps below are based on the official procedures for setting up WLAN wireless mode and are widely used by workshops globally.
Genuine VOCOM 1 units support online firmware updates. When a firmware update is initiated, the VOCOM configurator utility will automatically refresh the device settings upon completion, after which the technician can open Tech Tool and reconfigure the adapter settings as needed. Counterfeit units typically do not support hardware updates and can only function with a single, fixed software version.
Connect the Vocom 1 to the PC using the USB cable for initial setup. Select the or Wi-Fi tab in the configurator. vocom 1 configurator
Includes a 'Status' tab with error codes and signal strength
Inside the Configurator, select as the primary communication channel. Configuring a VOCOM 1 involves a series of
While the Vocom 1 Configurator is robust, the Vocom 2 offers faster processing speeds and better encryption. However, for older Euro 4 and Euro 5 vehicles, the Vocom 1 is often more than sufficient and significantly more budget-friendly for independent shops. Final Verdict
The Vocom 1 Configurator allows you to choose between three primary connection methods. 1. USB Connection (Recommended) When a firmware update is initiated, the VOCOM
Insert your Tech Tool installation media or open your downloaded software package.
The Configurator is essential for ensuring the hardware communicates correctly with both the PC and the vehicle. Its primary roles include: Firmware Updates
Enter your network SSID and security passphrase (WPA2-PSK recommended).
: After configuration, ensure the correct device is selected under [Comm.unit Selection] 3. Connectivity Modes