V2ray Mikrotik !!exclusive!!

Split-host (explicit proxy)

/ip/firewall/mangle/add chain=prerouting src-address=192.168.88.50 action=mark-routing new-routing-mark=v2ray_route passthrough=yes comment="Route specific device through V2Ray" Use code with caution. Troubleshooting Common Issues

# Create a virtual ethernet interface for the container /interface/veth/add name=veth-v2ray address=172.16.10.2/24 gateway=172.16.10.1 # Create a bridge to link the virtual interface /interface/bridge/add name=bridge-v2ray /interface/bridge/port/add bridge=bridge-v2ray interface=veth-v2ray # Assign the gateway IP to the router's bridge side /ip/address/add address=172.16.10.1/24 interface=bridge-v2ray Use code with caution. Step 3: Set Up the V2Ray Container Environment v2ray mikrotik

This method uses on the MikroTik router to forward targeted LAN traffic to a local V2Ray gateway pool. Step 1: Configure the V2Ray Client Gateway

Before starting, ensure your hardware and software meet these requirements: Step 1: Configure the V2Ray Client Gateway Before

Ensure your V2Ray gateway (or container) cannot be accessed from the WAN.

Running (or the more modern Xray-core ) on MikroTik hardware is a game-changer for users in regions with heavy internet censorship. While MikroTik doesn't offer native support for these protocols yet, the introduction of Docker containers in RouterOS v7 has made it a viable, high-performance solution for power users. The "Why": Why use V2Ray on MikroTik? The "Why": Why use V2Ray on MikroTik

"If traffic looks like a simple search, let it go. But if it’s destined for the restricted zones, hand it to the Ghost"

/routing/table/add name=to_v2ray fib /ip/route/add dst-address=0.0.0.0/0 gateway=192.168.88.254 routing-table=to_v2ray Use code with caution. Optimization and Troubleshooting Managing DNS Leaks