Download the verified MediaTek All-in-One USB Driver package compatible with Windows 10/11 (64-bit). Ensure you disable Driver Signature Enforcement in Windows before installation to prevent communication errors. 2. SP Flash Tool (V5 or V6)
A will flash briefly across the bottom of the interface to verify hardware handshaking.
Step 1: Install Drivers and Disable Driver Signature Enforcement
You skipped or improperly executed Step 3. Disconnect the phone, close SP Flash Tool, run the MCT Auth Bypass Tool first, connect the phone with volume keys held down until it registers success, and then open SP Flash Tool. Error: STATUS_CHIP_MISMATCH (0xC0080001) sp flash tool mt6765 link
Critical for filtering the USB port and bypassing the Secure Boot mechanism. 3. MTK Auth Bypass Tool
You will see a progress bar at the bottom change colors: Red (initialization), Yellow (flashing partitions).
This article is optimized for the keyword "SP Flash Tool MT6765 Link" with supporting LSI keywords: MediaTek Helio P35 flash, scatter file download, BROM bypass, VCOM drivers, stock ROM flashing. Download the verified MediaTek All-in-One USB Driver package
This indicates a communication breakdown in the preloader. For many newer MT6765 devices (especially Xiaomi, Redmi, Vivo, and Oppo), this happens because the preloader is "locked" to prevent unauthorized flashing. You will likely need to use an or a similar utility to unlock the bootloader before the SP Flash Tool can communicate. An Authentication (Auth) File may be required for some devices, which you load in the "Auth File" section of the SP Flash Tool.
Follow these steps carefully to flash your MT6765 device. Skipping the authentication bypass step will cause the process to fail.
Before the SP Flash Tool can communicate with your MT6765 device, Windows must recognize it in BROM mode. SP Flash Tool (V5 or V6) A will
You can now safely unplug the USB cable from your smartphone.
Once complete, a large green checkmark window labeled will appear on the screen.