To successfully download and install the update, you will need: : Connects the device to your PC.
Launch the Satlink upgrade application on your computer as an Administrator. Select the correct noted in the previous step.
Connect the Satlink WS-6933 to your PC using the Mini-USB cable. Turn the satellite meter . satlink ws 6933 firmware download updated
Caution: Always check the hardware revision of your specific WS-6933 unit. Flashing firmware meant for a different hardware version or a clone device can permanently damage (brick) your meter. Step-by-Step Firmware Installation Guide Follow these steps carefully to update your device safely: Step 1: Download the Files
The downloaded firmware file (usually with a .bin extension). Step-by-Step Installation To successfully download and install the update, you
Ensure the WS-6933 is powered on. Click the Connect button in the software tool. The status bar should indicate a successful connection to the device's mainboard chipset.
A progress bar will indicate the data transfer status. Do not bump the cable, shut down the PC, or turn off the Satlink finder during this window. Connect the Satlink WS-6933 to your PC using
: Some sources mention software like "SatEditor.exe" or "Satlink Feroze" that can be used with your device over a USB connection to update satellite lists. This software sometimes comes on a CD with the device.
If you have never connected your Satlink meter to your PC, you will need the appropriate USB-to-Serial drivers (often CH340 or Prolific drivers included in the download pack). Install the drivers and restart your computer. Step 3: Connect the Meter in Upgrade Mode Turn the Satlink WS-6933.