Resetter Printer Canon G2010 Jun 2026

A (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero.

The 5B00 error is a built-in safety feature. Every time you clean the print heads or perform a deep cleaning, excess ink is pumped into an internal sponge called the waste ink pad. When the internal counter reaches its limit, the printer stops working and flashes its indicator lights (typically 7 times alternately) to prevent ink from leaking out of the machine.

The version of the Service Tool you are using does not support the G2010 model. resetter printer canon g2010

Look at the top tab labeled Main . Locate the Clear Ink Counter section. Next to Absorber , make sure Main is selected in the dropdown menu. Apply the Reset: Click the Set button right next to it.

Note: If the printer displays an error light or turns off completely, remove the power cable, plug it back in, and restart the process from step 1. Step 2: Downloading the Correct Resetter Tool A (sometimes called a "service tool" or "WIC

While in Service Mode (steady green light), press the button 5 times .

or the Canon IJ Printer Assistant Tool for software-based maintenance. Every time you clean the print heads or

. While official Canon support typically recommends visiting a service centre

If manual button sequences fail, specialized software can provide a deeper reset.

Two common reasons: the printer is not in Service Mode (redo the button sequence carefully), or your USB cable is faulty.

Open Windows Task Manager, end any tasks related to Canon, unplug all other USB peripherals (like external hard drives or webcams), and try a different USB port directly on your PC motherboard. Important Safety Warning: Physical Waste Ink Pads