The tiny solder points on the PS4 motherboard are extremely easy to damage. Conclusion: Should You Do It?
Even professional downgrade services cannot bypass the fundamental limitation that you can only revert to the immediate previous firmware. If 9.00 is not the version directly before 13.02 in your update history, no amount of soldering will get you there.
13.02), your backup slot will only hold the immediate predecessor (12.50 or 13.00). A direct multi-version rollback without a prior hard hardware/software dump of that exact console is structurally impossible. Required Tools for Hardware Reversion ps4 downgrade 13.02 to 9.00
: A fine-tipped soldering iron, high-quality flux, and thin 30 AWG wrapping wire.
Furthermore, if you do not possess a clean, matching Syscon and NOR dump of your console from when it was on version 9.00, this method will cause a permanent hardware brick. You cannot use files downloaded from another console, as these files are cryptographically married to your specific motherboard components. Alternative Solutions for 13.02 Users The tiny solder points on the PS4 motherboard
: You can only revert to the immediately preceding version . If you updated from 13.00 to 13.02, you can only go back to 13.00— not 9.00 —unless 9.00 was the very last version you had installed before your current one. The Current State of 13.02 Jailbreaks As of April 2026, firmware 13.02 is in a "waiting period":
Before attempting or paying someone for a hardware downgrade, understand these hard limitations: Required Tools for Hardware Reversion : A fine-tipped
However, you can achieve a firmware downgrade using a precise hardware-level modification known as a , provided your individual console was updated directly to 13.02 from version 9.00. This comprehensive guide breaks down the core concepts, hardware requirements, and step-by-step realities of managing custom firmwares. Understanding the Reality of PS4 Downgrading
Firmware 13.02 burns a specific set of fuses that are not present or are less advanced in version 9.00. Downgrading would require resetting these fuses, which is physically impossible without specialized equipment and direct hardware modification (e.g., replacing the Southbridge chip entirely). For the average user, there is no software method to circumvent this. Thus, any claim of a “downgrade” from 13.02 to 9.00 via a simple USB drive or software tool is fraudulent.
If your system qualifies for a reversion, completing the process demands advanced micro-soldering skills, specialised extraction software, and external hardware interfaces.