Polycom Communicator C100s Windows 10 Driver -

Q: How do I update the driver? A: Follow the same steps as installing the driver, using the latest version.

While there is no dedicated Windows 10 installer, you can attempt the following methods to get the device working: : The

Once you've downloaded the driver, follow these steps to install it: Polycom Communicator C100s Windows 10 Driver

immediately following the installation to initialize the low-level audio layers. Method 2: Manual Update via Windows Device Manager

The hardware buttons (Volume, Mute, Answer) likely will not work because the legacy Skype API Q: How do I update the driver

Plug the Polycom C100s directly into a on your Windows 10 machine. Avoid USB 3.0 (blue ports) or external unpowered USB hubs, as they can cause voltage mismatch issues with older hardware.

Re-insert the USB cable into a primary motherboard port (avoid unpowered external USB hubs). Method 2: Force the Legacy Software via Compatibility Mode Method 2: Manual Update via Windows Device Manager

To use the C100s seamlessly with modern web conferencing software, you must adjust the settings within each individual application:

Even if the audio works, the physical buttons (Mute, Volume, Call) often do not sync with modern apps like Microsoft Teams or Zoom because the original software was hard-coded for legacy Skype.

In this guide, you've learned how to find, download, install, and configure the Polycom Communicator C100s Windows 10 driver. By following these steps, you should be able to ensure seamless integration between your IP phone and Windows 10 computer. If you encounter any issues, refer to the troubleshooting section or contact Polycom support for assistance.

Run the installer executable in . Right-click the installer file, go to Properties , click the Compatibility tab, check Run this program in compatibility mode for: , and select Windows 7 .