If the laser begins cutting but shuts off after a short time, this may be a hardware configuration issue rather than a software problem. One known issue involves the P‑DA‑01 driver: when connected, the laser shuts off completely after 1–2 seconds. Disconnecting that driver and connecting the laser directly to the MKS DLC32 TTL output has resolved this for some users.
is a Windows-based installer executable designed to deploy the proprietary laser engraving control software developed by the Makerbase team.
You can download the official from Makerbase's verified GitHub repository. This tool is primarily used for configuring Wi-Fi, updating firmware, and managing images for Makerbase laser control boards like the Go to product viewer dialog for this item. . Official Download Sources Mks Laser Tool Setup V1.1.2.exe Download
Navigate to the support or download section of the Makerbase site to find archived software packages.
Makerbase hosts all of its open-source software, firmware, and documentation on GitHub. Makerbase MKS-DLC32 GitHub Steps to Download: If the laser begins cutting but shuts off
: Open Device Manager and look under "Ports (COM & LPT)" for USB-SERIAL CH340 to find your COM port number.
: Use dedicated software like LaserGRBL or LightBurn for advanced photo-to-G-code processing, relying on the MKS tool primarily for configuration and firmware updates. is a Windows-based installer executable designed to deploy
: The .exe installer is designed for Windows OS only.
: Simplifies connecting the laser engraver to a local network by allowing users to input SSID and password details via a USB connection. G-Code Optimization
Before running the executable file on a Windows system, verify its properties to ensure it is authentic: MKS Laser Tool Setup V1.1.2.exe