If you'd like to dive deeper into the technical details, I can help you with: The exact for this configuration
If you want VPN clients to access the internet through the MikroTik (full tunnel), add a masquerade rule for the VPN pool. mikrotik l2tp server setup full
To secure your L2TP server, configure authentication settings: If you'd like to dive deeper into the
The default port for L2TP is 1701.
/ip pool add name=vpn-pool ranges=192.168.100.2-192.168.100.254 /ppp profile add name=l2tp-profile local-address=192.168.100.1 remote-address=vpn-pool dns-server=8.8.8.8,1.1.1.1 use-encryption=required /interface l2tp-server server set enabled=yes default-profile=l2tp-profile authentication=mschap2 max-mtu=1400 max-mru=1400 /ppp secret add name=john password=securepassword123 profile=l2tp-profile service=l2tp Step 4: Create VPN Users (Secrets) Ensure Proxy
Enter a strong pre-shared key (PSK) that clients will use to connect. Step 4: Create VPN Users (Secrets)
Ensure Proxy ARP is enabled on your bridge interface, or set up NAT for the VPN subnet.
No hay productos en el carrito.