For detailed wiring diagrams and dip switch settings, technical personnel typically refer to the full Lenel M Series Installation Guide available through authorized LenelS2 partners .
In the "Network" menu, assign your corporate static IP or enable DHCP, then save the configuration.
: Mount the new board onto the existing standoffs in the enclosure.
For OSDP readers (recommended):
The board supports both DHCP and static IP addressing. Set a static IP for reliable communication. Add Controller:
The designed to seamlessly migrate legacy CASI M5 or M3000 systems directly over to the Lenel OnGuard platform. It replaces legacy E, P, PX, PXN, and PXNplus CPUs, as well as the legacy CASI power/comm boards.
Verify the controller's IP, subnet mask, and gateway settings in OnGuard Communications Server. Incorrect RS-485 wiring or duplicate addressing. Lenel Lnl-3300-m5 Installation Manual UPD
The remains a staple in modern access control systems due to its robust offline capabilities and flexible configuration. While the physical installation is straightforward for experienced technicians, adhering strictly to the installation manual—particularly regarding power isolation and cable shielding—is the difference between a secure facility and a system prone to false alarms or hardware failure.
| Specification | Details | |---|---| | | LNL‑3300‑M5 | | Input Power | 12 VDC ± 10%, 300 mA maximum | | Power for Digital Outputs | 24 VDC maximum, 640 mA maximum | | Host Communication | 10/100 MB Ethernet (static IP or DHCP) | | Downstream Communication | Two 2‑wire RS‑485 ports (up to 115.2 Kbps) | | Cardholder Capacity | Up to 500,000 | | Encryption | AES‑128 | | Access Levels | 128 | | Elevator Control | Supported | | Operating Temperature | 32°F to 158°F (0°C to 70°C) | | Storage Temperature | -65°F to 185°F (-55°C to 85°C) | | Humidity | 5% to 95% RHNC | | Supported Protocols | Web, SNMP, Telnet |
To give the controller an identity on your network, use its on-board web server. For detailed wiring diagrams and dip switch settings,
[Power Supply Module] [LNL-3300-M5 Board] ├── 12VDC Output (+) ──────────────────> VIN (+) Power Input ├── Ground (-) ──────────────────> GND (-) Power Return ├── Tamper Relay ──────────────────> Cabinet Tamper Input └── AC Fault Relay ──────────────────> AC Power Fail Input Downstream RS-485 Cabling
The Lenel Lnl-3300-m5 Installation Manual typically consists of several sections, including:
is an Intelligent System Controller (ISC) designed specifically for the system. It serves as a plug-compatible, Mercury-based hardware replacement for legacy CASI M5 and M3000 boards , facilitating a modern migration path for systems like Picture Perfect , FCWnx , and Secure Perfect . 1. Pre-Installation Preparation For OSDP readers (recommended): The board supports both
Ensure the memory/clock backup battery jumper (often designated as ) is set to ON to prevent loss of local database logs during power outages. 💻 Step 3: Network Configuration (Web Interface)