Lambert Lx 24 Fi Manual English 'link' (2024)

Press the dedicated ON/OFF button to cycle the system out of standby mode.

Proper daily use and regular maintenance are key to the longevity and efficiency of your boiler.

| Specification | Details | |:---|:---| | Product Type | Conventional (On-Demand) Combination Boiler | | Model Name | Lambert Lx 24 Fi | | Power Output | 24 kW | | Max. Heating Capacity | Approximately 160 m² (subject to building insulation) | | Dimensions (HxWxD) | 725 mm x 400 mm x 300 mm | | Weight | 38 kg | | Expansion Vessel Capacity | 6 liters | | Domestic Hot Water Flow Rate | 10.7 liters per minute | | Max. Radiator (CH) Temp | 20°C - 80°C | | Max. Domestic Hot Water (DHW) Temp | 30°C - 65°C | | Electrical Power Consumption | 135 W | | Electrical Protection Rating | IPX4D (Splash-proof) | | NOx Class | 3 (Environmental standard) | | Color | White |

To get your boiler up and running, follow these standard procedures: Lambert Lx 24 Fi Manual English

The temperature delta across sensors is increasing too fast, implying inadequate fluid movement.

Due to the weight, unpack with two people. Check for any visible damage to the cabinet or the drivers (speaker cones). Retain the packaging for future transport.

Test the internal bladder pre-charge pressure using a standard tire pressure gauge while the boiler is fully depressurized. Recharge to approximately 1.0 bar using a manual air pump if needed. Press the dedicated ON/OFF button to cycle the

Includes a system mesh filter to protect the heat exchanger from debris. Flue Terminal Installation

Adjusts the radiator water temperature between 30°C and 85°C.

The displayed on the circular needle manometer. Heating Capacity | Approximately 160 m² (subject to

Lambert Lx 24 Fi Manual English: Installation, Operation, and Troubleshooting Guide

If you smell gas, turn off the gas valve immediately, extinguish all flames, do not operate electrical switches, and call a qualified service engineer.