Kes Geyser Load Control Timer Manual New [hot] -

The built-in Ni-MH backup battery has reached the end of its lifespan.

The internal backup battery is drained or the mains power is off.

Turn the main power switch at the master distribution board. Turn OFF the geyser isolator switch. 2. Wiring for DB Mount kes geyser load control timer manual new

While holding , press H+ to adjust to the current hour (24-hour format).

Avoids heating during high-tariff morning and evening peak hours. The built-in Ni-MH backup battery has reached the

Connect the Live (Red) wire from the 20A geyser circuit breaker to the L1 terminal.

Ensure the main circuit breaker feeding the timer is turned ON. Let the unit charge for 15 to 30 minutes, then press the Reset pinhole button to clear the memory and reboot the CPU. 2. The Geyser Turns On at the Wrong Times Turn OFF the geyser isolator switch

will help you manage your energy consumption, reduce your electricity bill, and provide hot water whenever you need it.