The Programat P100 is a dedicated ceramic furnace featuring a user-friendly design with a numeric keypad for efficient program selection and data entry. Its core function is to ensure precise temperature control and vacuum management during the sintering and glazing of dental ceramics.
If the P100 displays error messages, refer to the manual for specific codes.
The temperature at which the vacuum pump releases and turns off. ivoclar programat p100 manual english
The furnace chamber can reach very high temperatures. Always use the provided firing tongs.
: Press the START button once your program is selected. The furnace head will close, and the cycle will begin. The Programat P100 is a dedicated ceramic furnace
Turn on the main power switch located at the back or side of the unit. Wait for the furnace to reach its idle standby temperature. Select the desired program number using the or P- keys.
The baseline temperature of the furnace when idle (typically 403°C). The temperature at which the vacuum pump releases
Check the muffle resistance; replace the heating element or thermocouple. Vacuum failure (cannot reach target pressure).
The has long been a staple in dental laboratories worldwide, recognized for its reliability, precision, and user-friendly interface. As a compact, high-performance ceramic furnace, it is specifically designed for the firing, staining, and glazing of dental ceramics.
The furnace head contains insulating materials. According to the manual, repairs involving the heating muffle should only be performed by authorized After Sales Service Centers, as materials may require specialized handling.
The P100 should be calibrated at least once every six months using a Silver Test wire. If the wire doesn't melt precisely at 961°C, the furnace's internal temperature offset must be adjusted via the "Cal" function. Common Error Codes Err 1: Temperature sensor (thermocouple) failure. Err 2: Heating muffle is defective or disconnected.