Hdl Buspro Setup Tool 2 -

Assign the Subnet/Device ID of the light or appliance you want to control. 3. Configuring Output Devices

While the original "HDL Buspro Setup Tool" was the industry standard for years, Setup Tool 2 represents a modernization of the software architecture, offering better stability, a refreshed user interface, and improved compatibility with modern Windows operating systems.

Label each channel with its exact load (e.g., Ch1: Kitchen Island Pendants ).

If you encounter a new out-of-the-box module, it will likely hold a default address (e.g., 1.1). hdl buspro setup tool 2

[Buspro Network] └── Subnet ID (1-255) ├── Device ID 1 (Keypad) ├── Device ID 2 (Dimmer Actuator) └── Device ID 3 (Logic Module)

Double-click the discovered Dimmer or Relay module from the device list to open its properties window.

Connect your PC to the same network switch or router where the HDL Buspro IP Gateway is terminated. Ensure the entire Buspro network is powered by an official HDL power supply module. 2. PC Network Configuration Assign the Subnet/Device ID of the light or

This software is designed for and is lightweight, requiring only about 17 MB of disk space.

Test scenes immediately within the software to ensure they execute correctly. Key Features & Maintenance Buspro Gateway User Manual - HDL Automation

According to the HDL Buspro Setup Tool 2 Manual , common workflows include: Label each channel with its exact load (e

Open your Windows Network and Sharing Center. Modify your local network adapter properties to assign your PC a static IP address in the same subnet as your gateway. For example, if the default factory IP of the HDL Gateway is 192.168.1.250 , set your PC IP to 192.168.1.100 with a subnet mask of 255.255.255.0 . 3. Software Connection Settings

Understanding the version history is critical for compatibility with newer hardware components, as older versions may not support the latest devices or functions.

: Expert installers emphasize that the Buspro protocol lacks native encryption. Always isolate your IP gateway on a secure, trusted network to prevent unauthorized access.