Gordak 952 User Manual Updated Jun 2026

Controls the heating element and pump for the air gun.

Gordak 952 is a classic "2-in-1" soldering and hot air rework station that has become a staple for electronics hobbyists and repair professionals due to its affordability and reliability.

Three or four interchangeable hot air nozzles (varying diameters) Power cord ⚠️ Critical First-Time Setup (Crucial Step)

Here is a deep piece on the subject:

Always increase airflow before cranking the heat to protect the handle from melting.

Determined to not let his creation be used for evil, Gordak joined forces with Agent Thompson to track down the rogue group. Together, they embarked on a thrilling adventure through the dark corners of the internet and the city's underworld.

This updated user manual and operational guide provides comprehensive instructions, technical specifications, safety protocols, and troubleshooting steps to maximize the lifespan of your station. Technical Specifications gordak 952 user manual updated

The hot air gun includes a delayed auto-cool system that shuts down when the temperature drops, extending heater life.

| Application | Soldering Iron Temp (°C) | Hot Air Temp (°C) | Air Flow (Scale 1-10) | | :--- | :--- | :--- | :--- | | | 350 - 380 | 340 - 380 | 3-6 | | Leaded Solder (Sn63/Pb37) | 310 - 340 | 300 - 340 | 2-5 | | Large Ground Plane / Connectors | 380 - 420 | N/A | N/A | | SMD Chip Resistors / Capacitors | 320 - 350 | 280 - 320 | 3-4 | | SOIC / QFP ICs (64+ pins) | N/A | 330 - 360 | 4-7 | | BGA Rework (Underfill removal) | N/A | 360 - 400 | 5-8 | | Plastic Components (JST Connectors) | 250 - 280 | 180 - 220 | 1-3 | Note: Always decrease airflow for small components to prevent "blowing away" the part.

Arthur grabbed the switch. He needed an insult. A good one. Something that would hurt a machine that had spent forty years perfecting itself. Controls the heating element and pump for the air gun

Adjusts the target temperature for the hot air gun.

: Never use the station near flammable gases, liquids, or materials like paper. Key Operational Features

Arthur looked at the manual. There had to be a failsafe. He flipped to the last page. Determined to not let his creation be used

is the sweet spot. For lead-free, you may need to bump it to Soldering Iron (Right Side):