MPTools is . It talks directly to the controller chip, allowing you to:
Before running software built for FirstChip controllers, you must verify that your USB drive actually uses an or FC1179 chip. Running the wrong production tool can permanently brick your drive.
You should look for this specific version if your diagnostic tools (like or Flash Drive Information Extractor ) identify your hardware as: Controller: FirstChip FC1178 (or FC1178BC/FC1178S) Controller: FirstChip FC1179 firstchip fc1178 fc1179 mptools v1052 free
Once the tool reports “OK” or “Pass”:
If a standard scan fails, advanced users often switch to in settings to force a fresh restoration. Where to Find it Free MPTools is
For drives with incorrect capacity, set the Scan Level to Clear or Clear+Factory Scan to accurately determine the actual capacity of the NAND chip. Click OK to save settings. 4. Flashing the Drive Press the Start button (or "START" in English).
Enhanced stability compared to earlier 2018/2019 versions (e.g., 1.0.3.14). You should look for this specific version if
Extract the .zip archive completely and right-click FCMpTools.exe , then select Run as Administrator . Step 3: Step-by-Step Flashing Guide
It is highly recommended to use a USB 2.0 port on the back of your computer (motherboard port) to avoid disconnection issues.
Remember the golden rules:
Disclaimer: This tool is intended for repairing drives and will wipe all existing data. Use it responsibly. What is FirstChip FC1178/FC1179 MPTools?