Link Cli Commands: Ericsson Mini

show alarm history

interface ethernet 1 service-policy input backhaul

: Send logs to your network management system for monitoring.

: Advanced operations often require elevated privileges. Using grants privileged access, while ericsson mini link cli commands

Managing the Radio Link (RL) requires precise configuration of frequencies, modulation, and transmit power. Monitoring Radio Performance

If you need module-specific details, show subrack lists all modules in the subrack, their slot positions, and operational status. For network timing, use show clock to display the system clock status, synchronization source, and any timing alarms; show ntp status provides NTP association details, stratum, and offset. For licensing, show license status checks active feature licenses and expiration dates.

MINI-LINK supports:

sync-e quality-level g.811 # PRC source interface ethernet 1 priority 1 exit

For specific models (e.g., MINI-LINK 6352, 6692, CN510, CC4200), refer to Ericsson’s product-specific Command Descriptions Reference (CDR) document.

Displays hardware inventory, software versions, and current board temperatures. ping , traceroute , telnet Basic network diagnostic and reachability tools. Configuration config , write Enters configuration mode and saves changes to memory. Maintenance reload , activate show alarm history interface ethernet 1 service-policy input

interface vlan 1 # Management VLAN ip address 192.168.1.10/24 exit

admin> odu info admin> odu lldp neighbors admin> odu reset