Select your desired and set the faders for your first step. Press MIDI/Rec to save the step. Adjust faders for the next look, and press MIDI/Rec again. Repeat this process for up to 240 steps. Hold Program for three seconds to save and exit. Playing Back a Chase Press the desired Chase button (1–6) . Press the Auto/Del button to start automatic playback. Adjust the Speed slider to change step timing.
Used to select the specific intelligent light(s) you wish to control.
If the console doesn’t respond as expected, the manual suggests these first steps: disco 240 dmx controller manual
Features 8 universal channel faders, speed/fade time sliders, and a digital LCD display.
End of full manual text for the Disco 240 / DMX Operator 240 controller. Select your desired and set the faders for your first step
Tip: Ensure the controller is placed reasonably close to your sound source or speakers for accurate bass sync. 5. Editing and Deleting Memory Deleting a Single Scene Enter (hold Program for 3 seconds). Navigate to the desired Bank using Bank Up/Down .
For latest updates, visit www.americandj.com Repeat this process for up to 240 steps
Select your desired sequence by pressing one of the buttons.
Repeat for other scenes, then press and hold for 3 seconds to exit. How to Program a Chase (Sequence of Scenes)
To prevent signal reflection that can corrupt your light commands, plug a 120 \, \Omega \mathbin/ 1 \, \textW terminal resistor into the DMX Output of the very last fixture in your chain. 3. Patching and Channel Assignment