Cerwin Vega At40 Specs

The 1-inch dome tweeter provides the signature sizzling highs that Cerwin-Vega is famous for. While audiophiles seeking an ultra-smooth, laid-back British monitoring sound might find it bright, it was perfectly tailored for high-energy playback. To help users customize the speaker to their room acoustics, a high-frequency level control is located on the rear of the cabinet, allowing you to boost or cut the tweeter output. 4. Exceptional Sensitivity (95 dB)

The AT-40 was a key part of the middle tier of this series, which also included larger models like the AT-15 and AT-100. Its goal was to capture the "live music" energy Cerwin Vega was famous for in a floor-standing tower that was manageable in size for a typical living room.

Outfitted with Cerwin-Vega's iconic red/orange polyurethane foam surround. The 10-inch driver hits cleanly down to 30 Hz, offering punchy, rapid-fire mid-bass that works exceptionally well for rock, hip-hop, and electronic music. 2. Mid-Range Driver Size: 5 inches (12.7 cm) cone cerwin vega at40 specs

The Cerwin-Vega AT-40 is a late-1980s 3-way, rear-ported loudspeaker featuring a 10-inch woofer, 5-inch midrange, and 1-inch tweeter, delivering 95 dB sensitivity and 125 watts continuous power handling. Designed for high sound pressure levels, the system includes frequency response from 30 Hz to 22 kHz and adjustable midrange/tweeter controls. For detailed technical specifications, visit Classic Audio Cerwin-Vega AT-100 Loudspeakers (Vintage)

One of the notable features of the Cerwin-Vega AT40 is its high-performance drivers. The 10-inch woofer is designed to deliver tight and accurate low-end response, while the 1.75-inch high-frequency driver provides clear and detailed treble output. The drivers are carefully matched to ensure a smooth and cohesive soundstage. The 1-inch dome tweeter provides the signature sizzling

The Cerwin-Vega AT-40 is a vintage three-way bass reflex loudspeaker known for its high efficiency and signature "loud" sound profile. Introduced as part of the AT (Arc) series, these speakers were specifically designed to deliver high sound pressure levels with minimal amplifier power. Design: 3-way, Bass Reflex (ported) cabinet. Power Handling: 125 Watts. Frequency Response: 30 Hz – 22 kHz. Sensitivity: 95 dB (1 Watt @ 1 Meter). Nominal Impedance: 6 Ohms. Crossover Frequencies: 400 Hz and 3000 Hz.

The sealed-back 4" cone midrange is the unsung hero. Many CV speakers have a "hole" in the upper midrange due to crossing a large woofer directly to a horn. The AT-40 dedicates a driver to 600Hz–4.5kHz—the exact region of vocals, guitars, and snare drums. This gives the AT-40 a presence that cheaper CV speakers lack. and unexpectedly smooth dome tweeter

provides a deep, punchy low-end extension down to 30 Hz without needing an external subwoofer. Because it utilizes a 10-inch woofer rather than the massive 15-inch cones found on its larger sibling, the AT-100, the Go to product viewer dialog for this item.

If you are looking to purchase these, ensure to check the condition of the foam surrounds on the 10-inch woofers, as they are likely to have been replaced or need replacing due to age.

on platforms like eBay or local vintage marketplaces, keep the following in mind:

The Cerwin Vega AT-40 is proof that the company could do more than just "party speakers." With its robust 8" woofer, dedicated midrange, and unexpectedly smooth dome tweeter, the AT-40 delivers 85% of the pedigree of a JBL 4408 at 40% of the cost.