C3560-ipservicesk9-mz.150-2.se11.bin

: Allows the switch to run Exterior BGP for internet edge connectivity or multi-homed environments.

The base tier handles basic campus switching. It supports standard Layer 2 switching, VLANs, quality of service (QoS), and fundamental static routing. Dynamic routing is limited to basic RIP (Routing Information Protocol) or stub-routing implementations for EIGRP and OSPF. IP Services (Premium Features)

Because Cisco later declared End-of-Software Maintenance (EoSW) for standard 3560s, SE11 remains the for non-3560E switches with 32 MB flash. C3560-ipservicesk9-mz.150-2.se11.bin

After the reload completes:

Inform the switch switch hardware to use the new file during the next boot cycle: : Allows the switch to run Exterior BGP

If you are planning to upgrade your network hardware, tell me:

:If a valid image exists, boot it manually: switch: boot flash:C3560-ipservicesk9-mz.150-2.se11.bin Use code with caution. Dynamic routing is limited to basic RIP (Routing

IOS 15.0(2) has a larger footprint than the older IOS 12.2 images that many 3560 switches originally shipped with.

Ensure your switch has enough free space to hold the new firmware image. Switch# show flash: Use code with caution.

Advanced Access Control Lists (ACLs), Dynamic ARP Inspection, and DHCP Snooping.