Acer Q65h2-am V1.1 Manual Link

1 x RS-232 Serial COM port, 1 x RJ-45 Gigabit Ethernet port, and a standard 3-jack Analog Audio configuration. Internal Connections

If you need the exact pinout of the 9-pon front panel connector or the 4-pin speaker header for v1.1, please provide a clear photo of the area near the bottom-right corner of the board, as there are two variants of v1.1 (Foxconn vs. Pegatron manufacture).

The Acer Q65H2-AM is a proprietary micro-ATX motherboard designed for Acer Aspire desktop systems. It is based on the Intel H61 Express Chipset (or similar Q65 variant depending on the specific CPU generation supported) and is designed to support Intel 2nd and 3rd Generation Core processors (Socket LGA 1155). acer q65h2-am v1.1 manual

The Acer Q65H2-AM v1.1 is strictly designed around . It features a maximum Thermal Design Power (TDP) limit of 95W .

The motherboard features 4 physical slots color-coded to indicate dual-channel paths. To achieve optimal performance, prioritize matching module pairs across corresponding colored slots. The system caps out at using 4 x 4GB modules. It does not reliably accept high-density 8GB single-stick modules due to early BIOS memory addressing limitations. Expansion Slots and Storage Layout Internal Expansion Options 1 x RS-232 Serial COM port, 1 x

: This BIOS is generally locked. If CPU temperatures are high (e.g., 45-50°C at idle, 80°C under load), apply fresh, high-quality thermal paste between the CPU and cooler to improve heat transfer.

When moving the Acer Q65H2-AM V1.1 into a generic aftermarket PC case, you must manually bridge the front-panel cables to the correct header array on the board. Front Panel Header (F_PANEL) The Acer Q65H2-AM is a proprietary micro-ATX motherboard

: To switch an SSD to Legacy mode for older OSes, you may need to set an Administrator Password first. This action reveals the "Authentication" tab where you can disable Secure Boot and enable Legacy Boot.